GLFW is a great library – easy to use, great documentation covering it’s API design. But if you’re not on Windows where they provide pre-built libraries, going from a source download to a compiling Xcode project is _not_easy.
Since brew (as of writing) only provides GLFW 2, you need to build GLFW 3 yourself.
There is barely any information on it at all, it assumes you know exactly what you’ve downloaded (the source and some CMake files btw) and that you’ll be able to figure it all out (there is some additional information if you root around the GitHub forums but it’s not exactly easy to find).
So I’m posting up how I got GLFW to compile and running in Xcode here in-case anyone else starts banging their head against a brick wall.
Now to get it to compile you need to set up a few options. You can do this in the Cmake GUI, but I found it much easier to do it manually. Browse to GLFW/Src and open config.h.in.
This is a settings file for the compile you’re about to perform. There are a lot of settings in here you can play around with (they are explained in the README.md file in the root GLFW folder), but I enabled the following
- _GLFW_NO_DLOAD_WINMM (this is a Windows only define, but I enabled it so adding it here anyway)
Save the file and then you’re ready to compile.
Open the Terminal and browse to the root of the GLFW folder and enter the following commands
The Cmake command will set up the project ready to be built. It’ll take the config file we modified earlier and create a valid config.h file and it’ll carry out any other set up needed as well. Calling make builds the project, the install command installs the library in it’s default location.
Now you’re ready to add GLFW to your Xcode project. To keep it simple I’ll step through adding it to a new project, once you can do that adding it to an existing one is pretty easy.
- Open Xcode and create a new OSX Command Line Tool project
- In the project settings add the path to the GLFW include file in the ‘Header Search Paths’ and the path to the libglfw3.a lib to the ‘Library Search Paths’ option (both of these paths are shown in the install make output)
- Add libglfw3.a to the Link build phase
- You also need to add the following Frameworks to the build phase to allow the project to compile
You can now copy/paste the sample code provided on the GLFW website into the existing main.c file, hit compile and you have a running GLFW project.
Note that the sample code doesn’t call glclear before glfwSwapBuffers so what you get in the open window is undefined.